Filter
Top Products
LTRx-512 Installer’s Guide
Connecting the LTR-RSS
53
OPERATIONAL DESCRIPTION
To use the Remote Schedule Selector, the Operator will first select, via the Rotary Switch, which of the
Schedules is to be made active.
The ‘OFF’ position may be used to de-activate all schedules
Positions ‘1’ to ‘8’ may be used to select a single Schedule to be made ‘Active’
The ‘INQUIRE’ position may be used to determine which Schedules may be currently ‘Active’
without altering those schedules previously selected.
After setting the selected position of the Rotary Switch, the Operator should press the ‘ENTER
SELECTION’ Push-Button. This will transmit the appropriate Command to the Master. It will wait for
a reply from the Master, display which Schedule(s) are now Active on the Lighting Indicators (LEDs)
as confirmation to the Operator that the Command has been accepted and executed by the Master. The
lit Indicators will remain active for a period of five (5) seconds, after which the unit will go back to
‘sleep mode’, to conserve power.