Filter
Top Products
LTR-RSS User’s Guide
8
To select the address, use the numbers that add
up to equal the number of your Master’s
address, then slide those switches down. For
example, the default address is 065: switch 2
(value of 64) and switch 8 (value of 1) are
down (64+1 = 65). For address 003, slide down
switches 7 and 8 (2+1=3). For address 102,
slide down switches 2, 3, 6 and 7
(64+32+4+2=102).
• Locate the terminal block on the back of the
circuit board (upper left). Attach the
communication cable wire-pair (with proper
polarity) to the top two screws on the terminal
block. The top screw is Data - and the next one
down is Data + .
D
-
D+
~
~