Filter
Top Products
DISASSEMBLY PROCEDURE
Removing touch pad
3. Loosen the touch pad FPC cable then separate the top case module from the bottom
case module.
4. Disconnect touch pad FPC cable and remove 5 screws(M2*3L(K)) then take touch pad
backet off and take touch pad away.
M2*6L
M2*3L
M2*6L
M2*3L
Motherboard module
MOTHERBOARD
MODULE
MDC MODULE
REMOVAL
The illustrations below show how to disassemble and remove the Motherboard module
Removing Motherboard Module
1. Remove the audio DJ and 3 screws (M2*6L(K)).
3 - 13