Filter
Top Products
TPS400 Mining Manual-1.0.0en
Peg Survey
12
Proceeding Peg Survey, continued
[REJECT] Reject the
measurement and
measure the set
again.
[ACCEPT] Accept the result
and continue with
the next set.
Sample dialog:
> Step 8 Enter the reflector
height (hr) for the
foresight point, if
required.
> Step 9 Aim at foresight
point and measure.
[MEASURE] or [DIST]/[REC]
Angle and distance
measurements are
triggered and stored
in the internal
memory.
[EXIT] Terminates the
program and returns
to the start-up menu.
Repeat > Step 6
and > Step 9 until
all sets are
measured.
If the tolerances
after a set are not
met, the user has
the option to
continue with the
measuring or
rejecting the data.