Lenovo 1043 Server User Manual


 
Table 25. Items under the Boot menu
Item Sub-item Option Description
Quick Boot [Disabled] / Enabled
Enable or disable the quick
boot feature.
Quiet Boot [Enabled] / Disabled
Enable or disable the
feature to show OEM Logo
during the POST.
AddOn ROM / Display
Mode
[Force BIOS] / Keep Current Set the AddOn ROM
Display Mode.
Boot Settings Conguration
Bootup Num-Lock
[Off] / On Set the Num-Lock LED
state.
1st Boot Device Boot device namesBoot Device Priority
2nd Boot Device Boot device names
Set the startup device
sequence (support at most
ve startup devices).
Hard Disk Drives
1st Drive / 2nd Drive...
Based on the installed hard
disk drives.
CD/DVD Drives
1st Drive... Based on the installed
optical drives.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 26. Items under the Security menu
Item Description
Change Supervisor Password Set or change the supervisor password. The password
can be any combination of up to 6 (1 to 6) alphabetic and
numeric characters.
Change User Password Set or change the user password. The password can
be any combination of up to 6 (1 to 6) alphabetic and
numeric characters.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 27. Items under the Chipset menu
Item Sub-item Option Description
QPI Frequency [Auto] / 4.800GT / 5.866GT
/ 6.400GT
Standard transferring rate
of the QPI bus.
QPI L0s and L1 Disabled / [Enabled] Enable or disable the QPI
L0s and L1.
Memory Frequency
[Auto] / Force DDR-800 /
Force DDR-1066 / Force
DDR-1333
Set the frequency of the
memory module. Make
sure that the mandatory
memory frequency setting
is less than the maximum
frequency that the memory
module can support.
CPU Bridge Conguration
Memory Mode
[Independent] / Channel
Mirroring / Lockstep
Set the memory channel
mode to improve reliability
or efciency.
74 ThinkServer Installation and User Guide