Filter
Top Products
7. Reinstall the screw to secure the system stand hinge cover to the computer.
Figure7. Reinstalling the screw to secure the system stand hinge cover to the computer
Removing and reinstalling the system stand
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.
This section provides instructions on how to remove and reinstall the system stand.
To remove and reinstall the system stand, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the system stand hinge cover. See “Removing and reinstalling the system stand hinge cover”
on page 28.
Chapter 5. Installing or replacing hardware 29