Diagnostic Error Code FRU/Action
001-276-XXX System IRQ9 failure 1. Device on IRQ9
2. System board
001-277-XXX System IRQ10 failure 1. Device on IRQ10
2. System board
001-278-XXX System IRQ11 failure 1. Device on IRQ11
2. System board
001-279-XXX System IRQ12 failure 1. Device on IRQ12
2. System board
001-280-XXX System IRQ13 failure 1. Device on IRQ13
2. System board
001-281-XXX System IRQ14 (hard disk drive) failure
1. Hard disk drive cable
2. Hard disk drive
3. System board
001-282-XXX System IRQ15 failure 1. Device on IRQ15
2. System board
001-286-XXX 001-287-XXX 001-288-XXX System Timer
failure
System board
001-292-XXX System CMOS RAM error 1. Run the Setup and Utility program and re-test.
2. System board
001-293-XXX System CMOS Battery 1. CMOS Battery
2. System board
001-298-XXX System RTC date/time update failure 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180.
2. System board
001-299-XXX System RTC periodic interrupt failure System board
001-300-XXX System RTC Alarm failure System board
001-301-XXX System RTC Century byte error 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180
.
2. System board
005-000-XXX Video Test Passed No action
005-00X-XXX Video error
1. Video card, if installed
2. System board
005-010-XXX 005-011-XXX 005-012-XXX 005-013-XXX
Video Signal failure
1. Video card, if installed
2. System board
005-016-XXX Video Simple Pattern test failure
1. Video Ram
2. Video card, if installed
3. System board
005-024-XXX Video Addressing test failure 1. Video card, if installed
2. System board
005-025-XXX Video Checksum Value error
1. Video card, if installed
2. System board
Chapter 7. Symptom-to-FRU index 51