Filter
Top Products
Installing or removing the ThinkServer Management Module Premium
This topic provides instructions on how to install or remove the ThinkServer Management Module Premium
(hereinafter referred to as the TMM Premium).
The TMM Premium offers convenient, remote KVM access and control through the LAN or Internet. You
can use the TMM Premium to gain location-independent remote access to respond to critical incidents and
to undertake necessary maintenance. Therefore, working as an integrated solution in your server, the
TMM Premium provides an increased level of manageability over the basic server management. You can
purchase a TMM Premium from Lenovo.
Installing the TMM Premium
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 67.
This topic provides instructions on how to install the TMM Premium.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Use any documentation that comes with the TMM Premium and follow those instructions in addition to
the instructions in this topic.
• Depending on the model, your server might look slightly different from the illustration in this topic.
To install the TMM Premium, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a at,
clean, and static-protective surface. See the Rack Installation Instructions that comes with the server.
3. Remove the server cover. See “Removing the server cover” on page 69.
4. Touch the static-protective package that contains the TMM Premium to any unpainted surface on the
outside of the server. Then, take the TMM Premium out of the package.
100 ThinkServer RD330 User Guide