Filter
Top Products
4. Ensure that the cover latch is in the open position. Place the server cover above the chassis so that
the cover latch is aligned with the cover latch slot in the chassis. Then, lower the server cover onto
the chassis until the cover latch is inserted into its slot and both sides of the server cover engage the
guides on both sides of the chassis.
ID
CPU
Mem
PSU
Figure 101. Installing the server cover
5. Pivot the cover latch to the closed position and slide the server cover to the front of the chassis at the
same time until the server cover snaps into position and the cover latch is completely closed.
ID
CPU
Mem
PSU
Figure 102. Closing the server cover completely
6. If the server is installed in a rack cabinet, reinstall the server into the rack cabinet. See the Rack
Installation Instructions that comes with the server.
150 ThinkServer RD330 User Guide