Filter
Top Products
1 Integrated microphones
8 Monitor/Computer mode switch
2 Ambient light sensor Right
3 Integrated camera indicator
9 Speaker mute/unmute control (computer mode)
4 Integrated camera with block shield
Left
5 Power switch
10 Microphone mute/unmute control (computer mode)
6 Hard disk drive activity indicator Exit
7 On-Screen Display (OSD) menu
Enter
For more information about the front controls, see “Using your computer in monitor mode” on page 10.
Using your computer in monitor mode
Your computer can work in two modes: computer mode or monitor mode. This section provides instructions
on how to use your computer in monitor mode.
To use your computer in monitor mode, you need to have a second computer. Connect one end of the
DisplayPort cable to the DisplayPort-in connector on the rear of your computer, and the other end to the
DisplayPort connector on the second computer. Use the monitor/computer mode switch on the front of
your computer to switch your computer between computer mode and monitor mode.
The following table shows the functions of each control when your computer works in computer mode
or monitor mode.
Icon Control Description
On-Screen Display (OSD) menu Open the main OSD menu.
Enter
Conrm a selection.
Monitor/Computer mode switch
Switch your computer between computer mode
and monitor mode.
Right Move to the right.
Speaker mute/unmute control
(computer mode)
Turn on/off the internal speakers.
Left Move to the left.
Microphone mute/unmute control
(computer mode)
Turn on/off the integrated microphones.
Exit
Exit the main OSD menu.
10 ThinkCentre User Guide