Filter
Top Products
1. Install the solid state drive into the adapter. Then, install the four screws to secure the solid state
drive to the adapter.
Figure25. Installing the solid state drive into the adapter
2. To install the solid state drive with the adapter into the 3.5-inch hard disk drive bracket, ex the bracket
and align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the corresponding holes in the adapter.
Figure26. Installing the solid state drive with the adapter into the hard disk drive bracket
3. Connect the signal cable and the power cable to the solid state drive.
4. Install the solid state drive into the desired hard disk drive bay. See “Replacing the hard disk drive”
on page 47.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
46 ThinkStation User Guide