Filter
Top Products
If a user hard disk password has been set, but no master hard disk password has been, the user must enter
the user hard disk password in order to gain access to les and programs on the mSATA solid-state drive.
The master password can be set and used only by a system administrator. Like a master key, it enables the
administrator to get access to any hard disk drive in a system. The administrator sets the master password;
no one else knows it. Then the administrator sets a user password for each computer in the network, and
tells each user the password for his or her computer. The user can then change the user password as
desired, but the administrator still can get access by using the master password.
Note: When a master hard disk password is set, only the administrator can remove the user hard disk
password.
Setting a hard disk password
1. Print these instructions.
2. Save all open les, and exit all programs.
3. Turn your tablet off and then turn it on again.
4. When the logo screen is displayed, tap “To interrupt normal startup, press Enter”. The Boot Menu
window opens.
5. Tap the Application Menu tab. Tap Setup. The ThinkPad Setup program main menu opens.
6. Tap Security.
7. Tap Password.
8. Tap Hard Disk 1 Password.
9. A password window opens. You are prompted to select User or User + Master. Select User if you want
to set only one hard disk password. If you are an administrator or supervisor, you can select User +
Master to set two passwords. (The user can change the user password later.)
• If you select User + Master, do the following:
a. When a window for entering the new user hard disk password opens, enter your new password in
the Enter New Password eld. Tap Enter.
b. In the Conrm New Password eld, reenter the password you just entered to verify it. Tap Enter.
c. A message window opens and prompts you to set the master hard disk password. Tap Enter to
continue.
d. A window for entering the new master hard disk password opens. Enter your new password in
the Enter New Password eld. Tap Enter.
e. In the Conrm New Password eld, reenter the password you just entered to verify it. Tap Enter.
• If you select User only, do the following:
a. When a window for entering the new password opens, enter your new password in the Enter New
Password eld. Tap Enter.
Notes:
– You can set the minimum length of a hard disk password through the Security menu.
– If you set a hard disk password of over seven characters, the hard disk drive can be used only
with a computer that can recognize a hard disk password of over seven characters. If you then
install the hard disk drive in a computer that cannot recognize a hard disk password that
contains more than seven characters, you cannot get access to the drive.
b. In the Conrm New Password eld, reenter the password you just entered to verify it. Tap Enter.
Attention: You might want to note down your passwords and keep them in a safe place. Otherwise, if
you forget the user password, or both user and master passwords, Lenovo cannot reset your passwords
Chapter 4. Security 31