Filter
Top Products
4. Open the rear adapter retention bracket.
5. Press the rear adapter retention bracket and release the top hinge point; then,
release the other hinge point and remove the bracket from the chassis.
1 Rear adapter retention bracket
2 Hinge pins
6. If you are instructed to return the rear adapter-retention bracket, follow all
packaging instructions, and use any packaging materials that are supplied to
you for shipping.
Installing the rear adapter retention bracket
To install the rear adapter retention bracket, do the following:
1. Insert the bottom hinge point on the rear adapter retention bracket into the
matching hole in the chassis; then, insert the top hinge point into the matching
hole.
1 Rear adapter retention bracket
2 Hinge pins
2. Install the adapters (see “Installing an adapter” on page 96).
3. Close the rear adapter retention bracket.
Chapter 5. Installing optional devices and replacing customer replaceable units 53