Lenovo 384 Laptop User Manual


 
Error code POST error message Description/Action
CMOS Battery Failure The CMOS battery is no longer
functional.
Replace the battery.
Keyboard error or no keyboard
present
Cannot initialize the keyboard.
Make sure the keyboard is correctly
connected to the computer and that
no keys are held pressed during the
POST.
To purposely congure the computer
without a keyboard, set the error halt
condition in the Setup Utility program
to HALT ON ALL, BUT KEYBOARD.
The BIOS then ignores the missing
keyboard during the POST.
Press TAB to show POST screen
Pressing the TAB key permits you
to toggle between the default POST
screen and a custom POST display
screen.
Main processor
The main microprocessor information
is displayed on the POST screen.
Installed memory:
The total size of installed memory
modules is displayed on the POST
screen.
SATA 0:
The hard disk drive information is
displayed on the POST screen.
0210
Stuck key
When a key is kept pressed for a
long time, the error message will be
displayed during the POST.
0135
Fan failure
The system might be overheating.
Press F10 to exit.
Note: If the problem is caused by the
microprocessor fan, pressing F10 will
not solve the problem.
0211
Keyboard not found
When there is no keyboard detected,
the error message will be displayed.
0164 Memory size decreased Press F10 to exit.
1762
Conguration change has occurred
This error message is displayed when
a hard disk drive or optical drive
change has been made.
Press F10 to exit.
0662
Conguration change has occurred
This error message is displayed when
a oppy drive change has been made.
Press F10 to exit.
64 ThinkCentre Hardware Maintenance Manual