Filter
Top Products
6. Remove the old system board battery.
Figure97. Removing the system board battery
7. Install a new system board battery.
Figure98. Installing the system board battery
8. Reinstall the PCI card that has been removed. See “Installing a PCI card” on page 93.
9. Dispose of the old system board battery as required by local ordinances or regulations.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 168
. After you replace
the system board battery, you must reset passwords, reset system date and time, and recongure the
server. See Chapter 5 “Conguring the server” on page 55
.
Replacing the system board
Attention: Do not open your server or attempt any repair before reading and understanding the “Safety information”
on page iii and “Guidelines” on page 83.
This topic provides instructions on how to replace the system board.
CAUTION:
Hazardous moving parts. Keep ngers and other body parts away.
162 ThinkServer Hardware Maintenance Manual