Filter
Top Products
– High temperature, high humidity, or direct sunlight
– Excessive vibration, sudden shock, or inclined surface
– Excessive dust
Loading a disc
1. Press the Eject button. The tray slides out of the drive.
2. Place a disc in the tray with the label facing up.
3. Close the tray by gently pushing the tray in until it latches.
Attention: Do not use force or insert foreign objects to open the tray. If your tray does not open when you press the
Eject button, see “Manually ejecting a disc” for more information.
Manually ejecting a disc
If you press the Eject button and the tray does not slide out, turn off the computer and straighten a large
paper clip to form a tool, as shown in the illustration. The straightened end must extend at least 45 mm
(1.8 inch). Insert the extended end into the manual-eject hole on the front of the drive. Push the paper
clip until the tray opens. Gently pull out the tray until you can remove the disc.
45 mm
1.8 in
Using the DVD function
If the operating system of your computer is Windows Vista Home Premium or Windows Vista Ultimate,
you can view DVD movies without installing any additional software. Windows Media
®
Player comes
fully configured to play DVD videos in those operating system versions. In Windows Vista Ultimate, you
can also use Windows Media Center to view DVD videos.
If the operating system of your computer is Windows XP, Windows Vista Business, or Windows Vista
Home Basic, you must install WinDVD to play back DVD videos.
4 ThinkPad DVD-ROM Ultrabay Serial ATA Drive User Guide