Filter
Top Products
31
Appendix. CRU instructions
Replacing the battery pack
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the battery pack, do the following:
1
Turn off the computer. Disconnect the AC power adapter and all cables from the computer.
2
Close the computer display and turn the computer over.
3
Unlock the manual battery pack latch . While holding the spring-loaded battery pack
latch in the unlocked position , remove the battery pack in the direction shown by the
arrow .
4
Install a fully charged battery pack.
5
Slide the manual battery pack latch to the locked position.
6
Turn the computer over again.
7
Connect the AC power adapter and the cables to the computer.
Notes:
• The illustrations used in this appendix are for the Lenovo IdeaPad Y510p, unless otherwise stated.
• The following steps about upgrading and replacing devices are the same for the Y410p and Y510p.
• Make sure the battery pack has been removed before replacing any devices.
Note: Use only the battery pack provided by Lenovo. Any other battery pack could ignite or explode.
a
b
c
$
%
&