Connecting your computer
Use the following information when connecting your computer.
v Look for the small connector icons on the back of your computer. Match the
connectors to the icons.
v If your computer cables and connector panel have color-coded connectors,
match the color of the cable end with the color of the connector. For
example, match a blue cable end with a blue connector or a red cable end
with a red connector.
Note: Depending on your model, your computer might not have all the
connectors that are described in this section.
1. Check the position of the voltage-selection switch on the rear of the
computer. Use a ballpoint pen to slide the switch, if necessary.
Note: Some computers do not have a voltage-selection switch. These
computers automatically adjust to the voltage at the electrical outlet
regardless of the country or region where the computer is being
connected.
v If the voltage supply range is 100–127 V AC, set the switch to 115 V.
v If the voltage supply range is 200–240 V AC, set the switch to 230 V.
115
18 Safety and Warranty Guide