Filter
Top Products
4. To reinstall the front bezel, align the other three plastic tabs on the bottom of the front bezel with the
corresponding holes in the chassis, then pivot the front bezel inward until it snaps into position.
Figure 8. Reinstalling the front bezel
5. Go to “Completing the parts replacement” on page 40.
Accessing the system board components and drives
Attention: Do not open your computer or attempt any repair before reading and understanding the “Important safety
information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the
ThinkCentre Safety and Warranty Guide, go to:
http://support.lenovo.com
This section provides instructions on how to access the system board components and drives.
To access the system board components and drives, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover to access the system board components. See “Removing the computer
cover” on page 12
.
3. Remove the front bezel.
14 ThinkCentre User Guide