Filter
Top Products
* You can obtain a Universal Adapter Bracket, 5.25 to 3.5-inch from a local
computer retailer or by contacting the Customer Support Center.
Installing a drive in bay 1 or bay 2
To install a drive in bay 1 or bay 2:
1. Remove the computer cover. See “Removing the cover” on page 12.
2. Remove the front bezel. See “Removing and replacing the front bezel” on
page 14.
Note:
Notice the spare retainer bracket 1 attached to the side of the upper
drive cage.
3. Remove the metal static shield from the drive bay using your fingers to pull it
outward.
4. If you are installing a drive with accessible media, such as an optical drive,
remove the plastic panel in the bezel for bay 2 by squeezing the plastic tabs
that secure the panel on the inside of the bezel.
5. Remove the retainer bracket from the upper driver cage by sliding it
downward.
Figure 12. Locating the spare retainer bracket
Chapter 3. Installing options and replacing hardware 21