Filter
Top Products
1060 Memory module
For access, remove these FRUs in order:
• “1010 Battery pack” on page 46
• “1030 Hard disk drive (HDD)/memory module/mini PCI Express Card slot compartment cover” on page 47
Removal steps of memory module
Release the two latches on both edges of the socket at the same time in the direction shown by the arrows
1 , and then unplug the DIMM in the direction shown by the arrow 2 .
b
a
a
Note: If only one memory module is used on the computer you are servicing, the card must be installed in
SLOT-0 ( a : lower slot), but not in SLOT-1 ( b : upper slot).
a
b
When installing: Insert the notched end of the memory module into the socket. Press the memory module
rmly, and pivot it until it snaps into place. Make sure that it is rmly installed in the slot and does not
move easily.
50 Hardware Maintenance Manual