Remove the keyboard bezel in the direction shown by the arrow 7 .
7
Remove the screw 8 and then remove the power board 9 .
9
8
Step Screw (quantity) Color
Torque
9
M2 × 3.5 mm, at-head, nylon-coated (1)
Black
2.5 kgfcm
1100 System board assembly
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated
conductive surface.
56 Hardware Maintenance Manual