Filter
Top Products
35
Appendix A. CRU instructions
Replacing the battery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the battery, do the following:
1
Turn off the computer, or enter hibernation mode. Disconnect the AC
adapter and all cables from the computer.
2
Close the computer display, and turn the computer over.
3
Unlock the manual battery latch . Holding the spring-loaded battery
latch in the unlocked position , remove the battery pack in the direc-
tion shown by the arrow .
4
Install a fully charged battery.
5
Slide the manual battery latch to the locked position.
6
Turn the computer over again. Connect the AC adapter and the cables to
the computer again.
Notes:
• The illustrations used in this chapter are of the Lenovo G465, unless otherwise stated.
• The following steps about upgrading and replacing devices are the same for the G465 and G565.
Note: Use only the battery provided by Lenovo. Any other battery could ignite or explode.
a
b
c
b
1
a
c