Filter
Top Products
• “Installing the WiFi units” on page 71
Removing the WiFi adapter card
To remove the WiFi adapter card, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 38.
3. If your computer comes with a WiFi card module that supports the Bluetooth function, disconnect
the Bluetooth cable from the WiFi adapter card.
Figure 51. Disconnecting the Bluetooth cable
Note: The Bluetooth cable connects the Bluetooth connector on the WiFi adapter card to the front USB
connector on the system board to support the Bluetooth function.
4. Remove the screw that secures the WiFi adapter card.
Chapter 5. Installing or replacing hardware 69