Filter
Top Products
1210 Structure frame and IEEE1394 cable
For access, remove these FRUs, in order:
v “1010 Battery pack” on page 58
v “1020 Ultrabay Enhanced device for R60, R61, and R61i” on page 59
v “1030 Hard disk drive cover, hard disk drive, and hard disk drive rubber rails”
on page 60
v “1040 Palm rest or palm rest with fingerprint reader” on page 64
v “1060 Keyboard” on page 68
v “1070 Optical drive for R60e and R61i” on page 70
v “1080 Heat sink plate and Modem daughter card (MDC-1.5)” on page 71
v “1090 PCI Express Mini Card for 802.11 a/b/g wireless LAN” on page 74
v “1100 PCI Express Mini Card for 802.11 a/b/g/n wireless LAN” on page 76
v “1110 PCI Express Mini Card for wireless WAN for R60 and R61i” on page 78
v “1130 Keyboard bezel and wireless WAN antenna cable (AUX)” on page 80
v “1140 SIM card slot” on page 82
v “1150 Fan assembly” on page 83
v “1170 LCD assembly” on page 88
v “1180 Base cover” on page 91
Remove the USB sub card with cable.
1
2
3
Step Screw (quantity) Color Torque
1 M2 × 3.5 mm, small-head, nylon-coated (1) Silver 0.167 Nm
(1.7 kgfcm)
2 M2.5 × 6 mm, flat-head, nylon-coated (1) Black 0.392 Nm
(4 kgfcm)
In step 3, detach the connector and release the cable from the cable guide of the
frame.
When installing: Make sure that the connector 3 is attached firmly.
(continued)
Removing and replacing a FRU
98 MT 0656, 0657, 0658, 0659, 9455, 9456, 9457, 9458, 9459, 9460, 9461, 9462, 9463, 9464, 8942, 8943, 8944, 8945, and 8947