Filter
Top Products
27
DEUTSCH
ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
To obtain the correct cables and/or to get further instructions on installing
them, call the IBM HELPCENTER at the above numbers or contact your
dealer, retailer, or other IBM authorized Servicer.
Setting up & connecting your DVI-D cable
1. Refer to
“Removing the stand & cables section”
on step 1-6 of
page 26/27.
2. Connect the DVI-D cable to DVI-D connector.
3. Route the cable as shown in the diagram.