Filter
Top Products
Table 29. Removal steps of base cover (continued)
4
5
4
a
Step Screw (quantity) Color Torque
4 M2 × 5 mm, flat-head, nylon-coated (2) Black 0.167 Nm
(1.7
kgfcm)
5 M2 × 3 mm, small-head, nylon-coated (1) Silver 0.167 Nm
(1.7
kgfcm)
For discrete graphics models: When you are servicing, make sure that the
thermal rubber for FET is firmly attached on the system board as shown in a.
When replacing the rubber, you need to peel the thin film off from the bottom,
and attach it to the system board.
ThinkPad T61 and T61p (14.1-inch) 93