Filter
Top Products
29
Chapter 2. Using Your Computer
5 Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
6 Commit your password to memory, and press the Enter key.
7 Press F10 to exit.
8 Select Yes in the Exit Saving Changes window.
Changing or Removing the Supervisor Password
To change the password, do the following:
1 Select Set Supervisor Password, and press the Enter key. The Set
Supervisor Password window opens.
2 Choose your Supervisor password, which can be from two to eight
alphanumeric characters in any combination. Select Enter Current
Password and type in the correct password. Then press Enter key once
to move to Enter New Password field, type a new supervisor
password in.
3 Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4 Commit your password to memory, and press the Enter key.
To remove password, do the following:
1 Select Set Supervisor Password, and press the Enter key.
2 Select Enter Current Password and type in the correct password, and
press the Enter key thrice.
Lenovo IdeaPad U330 UG V1.0_en.book Page 29 Wednesday, July 2, 2008 4:57 PM