Filter
Top Products
Table 29. Removal steps of base cover and USB sub card with cable (continued)
Attention: Before step 7, be sure that the Serial Ultrabay Slim device eject
lever has not popped out. It must be housed in its position as shown in the
figure a.
7
a
8
Remove the USB sub card with cable as shown in this figure.
2
1
1
Step Screw (quantity) Color Torque
1 M2 × 3.5 mm, wafer-head, nylon-coated (2) Black 0.189 Nm
(1.85 kgfcm)
Removing and replacing a FRU 119