Filter
Top Products
1030 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid
state drive (SSD) and storage converter
For access, remove this FRU:
v “1010 Battery pack” on page 84
Table 11. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage
converter
1
Step Screw (quantity) Color Torque
1 Hard disk drive screw, nylon-coated (1) Black 0.189 Nm
(1.85 kgfcm)
3
4
2
When installing: Make sure that the HDD connector or SSD connector is
attached firmly.
Attention:
v Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damage
and permanent loss of data.
v Before removing the drive, have the user make a backup copy of all the
information on it if possible.
v Never remove the drive while the system is operating or is in suspend mode.
86 ThinkPad T500 and W500 Hardware Maintenance Manual