1170 CPU thermal device/fan
For access, remove these FRUs in order:
v “1010 Battery pack” on page 88
v “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state
drive (SSD) and storage converter” on page 91
v “1060 Palm rest or palm rest with fingerprint reader” on page 98
v “1090 Keyboard” on page 104
v “1120 DIMM slot cover and DIMM under keyboard for W701 and W701ds” on
page 111
v “1130 Keyboard bezel and speaker assembly” on page 113
Table 30. Removal steps of CPU thermal device/fan for W700 and W700ds
For ThinkPad W700 and W700ds:
Note: Loosen the screws 1, 2, and 3, but do not remove them. When you
attach the fan, secure the screws in order as shown in this figure.
1
2
3
4
Step Screw (quantity) Color Torque
4 M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm
(1.85 kgfcm)
Attention: Do not handle the fan roughly. Improper handling of the fan can
cause distortion or deformation and imperfect contact with components.
Removing and replacing a FRU 127