Filter
Top Products
39
Appendix A. CRU instructions
Replacing the battery pack - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the battery pack, do the following:
1
Turn off the computer, or enter hibernation mode. Disconnect the AC
adapter and all cables from the computer.
2
Close the computer display, and turn the computer over.
3
Unlock the manual battery latch . Holding the spring-loaded battery
latch in the unlocked position , remove the battery pack in the direc-
tion shown by the arrow .
4
Install a fully charged battery pack.
5
Slide the manual battery latch to the locked position.
6
Turn the computer over and reconnect the AC adapter.
Note:The illustrations used in this chapter are of the Lenovo IdeaPad Z480, unless otherwise stated.
Note: Use only the battery provided by Lenovo. Any other battery could ignite or explode.
a
b
c
&
1
$
%