Filter
Top Products
- 14 -
*After invoking the Hot Key function with the you must key
in the corresponding active key (Step 2) within 3 seconds for each key press.
( The Scroll LED will start blinking and wait for the Step 2 hotkey, after
pressing any key or over 3 seconds, the keyboard LED will back to the
original status.)
Three Steps Hot Key definition table
Step 1 Step2 Action
USB HUB Auto-Switch mode
Switches access to the computer which connecting to host1
Switches access to the computer which connecting to host2
Switches access to the computer which connecting to host3
Switches access to the computer which connecting to host4
Switch the HUB to host 1
Switch the HUB to host 2
Switch the HUB to host 3
Switch the HUB to host 4
*
AutoScan time interval is 5 seconds
(Available only when Auto-Scan function is ON)
*
AutoScan time interval is 10 seconds
(Available only when Auto-Scan function is ON)
*
AutoScan time interval is 15 seconds
(Available only when Auto-Scan function is ON)
No Scroll Key
Need
*
AutoScan time interval is 20 seconds
(Available only when Auto-Scan function is ON)
* Notice : To adjust the interval time for AutoScan, you do not need to press the
SCROLL key, and this can be used only by normal number key.
3. On-Screen-Display (OSD) Switch (Windows only):
You may also use the OSD utility software from the enclosed CD to switch
between computers.