Filter
Top Products
LevelOne Broadband Router User Guide
Printer Port (FBR-1403TX only)
On the FBR-1403TX, the following screen is available. These settings are only useful if using
LPD printing under Unix. Normally, these settings do not need to be changed.
Figure 50: Printer Port Screen
Data - Printer Port Screen
Logical Printers
No (L1, L2, L3)
Logical printer configuration is only required if using LPD
printing under Linux or Unix. Otherwise, these settings are
ignored
There are 3 Logical Printers (Ports), named L1, L2, and L3.
These names can not be changed, and must be used when select-
ing the logical printer from your Unix system.
Pre-string (HEX)
Enter (in HEX) the series of printer commands to be sent to the
attached printer BEFORE each print job.
Post-string (HEX)
Enter (in HEX) the series of printer commands to be sent to the
attached printer AFTER each print job.
LF to CR/LF
If checked, Unix-style LF (line feed) characters at the end of each
line will be converted to CR/LF (carriage return/line feed) pairs,
as used in MSDOS and Windows.
78