Filter
Top Products
39
4.6.4 MAC Address Control
MAC Address Control allows you to assign different access right for different users and to assign a
specific IP address to a certain MAC address.
MAC Address Control Check “Enable” to enable the “MAC Address Control”. All of the
settings in this page will take effect only when “Enable” is checked.
Connection control Check "Connection control" to enable the controlling of which wired can
connect to this device. If a client is denied to connect to this device, it
means the client can't access to the Internet either. Choose "allow" or
"deny" to allow or deny the clients, whose MAC addresses are not in the
"Control table" (please see below), to connect to this device.
Control table
"Control table" is the table at the bottom of the "MAC Address Control"
page. Each row of this table indicates the MAC address and the expected
IP address mapping of a client. There are four columns in this table: