Filter
Top Products
70
5.4 Configuring on Unix-like based Platforms
Please follow the traditional configuration procedure on Unix platforms to setup the print server of this
product. The printer name is “lp.”
※Noticed: If the router has USB and Parallel port at the same time, Please be careful to setup.
1.Use Parallel to print
Queue Name: lp
2.Use USB to print
Queue Name: lpUSB0
In X-Windows, for example, In Redhat Platforms,
Please follow the below steps to configure your printer on Red Hat 9.0.1. Start from the Red Hat--->
System Setting---> Printing.
2. Click New---> Forward.