Filter
Top Products
LevelOne Broadband Router User Guide
Configuration Program
The LevelOne Broadband Router contains an HTTP server. This enables you to connect to it,
and configure it, using your Web Browser. Your Browser must support JavaScript. The
configuration program has been tested on the following browsers:
• Netscape V4.08 or later
• Internet Explorer V4 or later
Preparation
Before attempting to configure the LevelOne Broadband Router, please ensure that:
• Your PC can establish a physical connection to the LevelOne Broadband Router. The PC
and the LevelOne Broadband Router must be directly connected (using the Hub ports on
the LevelOne Broadband Router) or on the same LAN segment.
• The LevelOne Broadband Router must be installed and powered ON.
• If the LevelOne Broadband Router's default IP Address (192.168.0.1) is already used by
another device, the other device must be turned OFF until the LevelOne Broadband
Router is allocated a new IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the LevelOne Broadband Router will
appear in the system tray, notifying you that a new network device has been found, and offer-
ing to create a new desktop shortcut to the newly-discovered device.
• Unless you intend to change the IP Address of the LevelOne Broadband Router, you can
accept the desktop shortcut.
• Whether you accept the desktop shortcut or not, you can always find UPnP devices in My
Network Places (previously called Network Neighborhood).
• Double - click the icon for the LevelOne Broadband Router (either on the Desktop, or in
My Network Places) to start the configuration. Refer to the following section Setup Wizard
for details of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the LevelOne Broadband Router:
1. After installing the LevelOne Broadband Router in your LAN, start your PC. If your PC is
already running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the LevelOne Broadband
Router, as in this example, which uses the LevelOne Broadband Router's default IP Ad-
dress:
HTTP://192.168.0.1
10