Filter
Top Products
35
System Setting Function
z Enter System Setting
1. Press the switch A for two seconds to enter System Setting.
2. Press the switch B for selection options.
3. Press the switch A to enter the selection options.
z NETWORK SETTINGS
Enter the Network Setting, press the switch B to choose DHCP or Static IP.
1. Obtain IP Address Automatically (DHCP)
DHCP will automatically obtain IP address settings.
2. Specify Static IP Address (STATIC IP)
press the switch A to select STATIC IP and complete the following steps:
• SET STATIC IP
Press the switch B to set the IP address settings (press the switch B to select the
number 0~25)/ Press the switch A for the next number.
• SET NETMASK
Follow the same procedure as above.
• SET GATEWAY
Follow the same procedure as above.
• SELECT STATIC IP
Press the switch B to select YES or NO and confirm by pressing the switch
A.NO will return to the Network Settings menu.
• RESTART SYSTEM
You need to restart the system to make changes effective. Press the switch B to
select YES or NO and press the switch A to confirm.
z POWER DOWN
Press the switch A to shutdown the system.
z REBOOT SYSTEM
Press the switch A to reboot the system.
z EXIT
Press the switch A to exit the settings menu.