9
cabling.
Status LEDs
This LevelOne 16Port 10/100Mbps 13” Fast Ethernet Switch comes with a
complete range of LEDs. The table below lists each LED’s name, color
and a brief description of its function.
• One for power On/Off
• One per port for Link/Activity
• One per port for Full-Duplex/Collision
NAME COLOR FUNCTION
PWR Green • Lit: Power "On"
LINK/ACT Green • Lit: When the port has a valid phys
ical connection (Link)
with another device.
•
Blinks: When the port is sending or receiving data
(Activity).
FD/COL Amber • Lit: When the port is set to Full-Duplex mode.
• Blinks: When a collision is detected,in Half-Duplex mode.
The Rear Panel
Power Socket
The Power Socket is designed to be used with the power cord included
in the product package.
a) Attach the female end of the cord to the power connector on the
back panel.
b) Attatch the male end of the cord to a grounded power outlet.