Filter
Top Products
Add Item: To add a device to the Monitor List manually, enter
the IP Address of the device that you want to monitor.
Delete Item: To delete the device in the Monitor List.
Device Setting
You can set the device by using the function key in the Device
Setting Dialog box.
Configuration Setting: In this Configuration Setting, you can
set the IP Address, Subnet Mask, Gateway, Set Trap to (Trap
IP Address), System name and Location.
Select the device in the Discovery list or Monitor List and press
this button, then the Configuration Setting window will pop out
as Figure 9, after filling up the data that you want to change,
you must fill up the password and press the “Set” to process the
data changed immediately.
Figure 9. Configuration Setting
Password Change: You can use this Password Change when
you need to change the password, fill in the password needed
in the dialog box and press “Set” button to precede the
password change immediately.
19