Filter
Top Products
2
Chapter 2
Installation
This Chapter covers the physical installation of the WBR-3407.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and a DSL connection.
• To use the WBR3407, all Wireless devices must be compliant with the IEEE 802.11g or
IEEE 802.11b specifications.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the WBR-3407.
For best Wireless reception and performance, the WBR-3407
should be positioned in a central location with minimum
obstructions between the WBR-3407 and the PCs.
Also, if using multiple Access Points, adjacent Access
Points should use different Channels.
6