Filter
Top Products
2
2 Installation
2.1 Overview
In this chapter we will cover how to install the LevelOne WPC-0100 11Mbps Wireless
PCMCIA Adapter.
To establish your wireless network connection, the following steps should be executed.
1. Install the software using the installation CD
2. Install the LevelOne WPC-0100 11Mbps Wireless PCMCIA Adapter..
3. Install the required network protocols to communicate with your network. Most likely,
you will need the TCP/IP protocol.
The product is designed to operate in Windows 98SE, Windows Me, Windows NT4.0
with Service Pack 3 or later and Windows 2000. And the installation procedure is about
the same. Please follow up the installation wizard that provided by your system to
install the software. The example here is based on Window 98SE.
2.2 Install the IEEE802.11b WLAN Utility/Driver
Please install the IEEE802.11b WLAN Utility/Driver first
before inserting the LevelOne WPC-0100 11Mbps
Wireless PCMCIA Adapter.
1. Insert the IEEE802.11b WLAN installation CD into your CD-ROM drive. The setup
program will then automatically start.
2. The setup program will start and the setup screen will appear on your monitor.
Select “ Next “ to go to the next screen.