Filter
Top Products
Menu item Description
Memory Use
All receive
Mostly receive
Equal
Mostly sent
All send
Defines the allocation of non-volatile memory between sending and receiving
fax jobs
Notes:
• “All receive” specifies that all the memory is set to receive fax jobs.
• “Mostly receive” specifies that most of the memory is set to receive fax jobs.
• Equal is the factory default setting. Equal splits the memory for sending and
receiving fax jobs into equal amounts.
• “Mostly sent” specifies that most of the memory is set to send fax jobs.
• “All send” specifies that all the memory is set to send fax jobs.
Cancel Faxes
Allow
Don't Allow
Specifies whether the printer may cancel fax jobs
Note: If Cancel Faxes is not enabled, it will not appear as an option.
Caller ID
FSK
DTMF
Specifies type of caller ID being used
Note: FSK is the factory default setting.
Fax number masking
Off
From left
From right
Specifies the direction from which digits are masked in an outgoing fax number
Note: The number of characters masked is determined by the “Digits to mask”
setting.
Digits to mask
0–58
Specifies the number of digits to mask in an outgoing fax number
Fax Send Settings
Menu item Description
Resolution
Standard
Fine
Super Fine
Ultra Fine
Specifies quality in dots per inch (dpi). A higher resolution gives greater print
quality, but it increases the fax transmission time for outgoing faxes.
Note: Standard is the factory default setting.
Understanding printer menus
199