Lexmark 748dte Printer User Manual


 
= Supported
X = Not supported
Printer model
Operator Tray selected (corresponding
image size is set)
C746, C748 X746, X748
a4tray Tray with A4-size paper
a5tray Tray with A5-size paper
a6tray Tray with A6-size paper
b4tray Tray with B4size paper
b5tray Tray with B5-size paper
customtray Tray with custom-size paper XX
executivetray Tray with executive-size paper
foliotray Tray with folio-size paper
ledgertray Tray with ledgersize paper
legaltray Tray with legal-size paper
lettertray Tray with letter-size paper
oficiotray Tray with oficiosize paper
statementtray Tray with statement-size paper
PostScript envelope size support
The literal names in “Envelope sizes supported” on page 15 are also supported as operators in userdict. These
operators change the image size, but do not change the active paper source. Therefore, when these operators are used,
part of the image may be clipped.
When these literal names are used as operators, it is equivalent to executing the following PostScript emulation
sequence. The following example uses a 3.875 x 7.5 envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
Envelope sizes supported
= Supported
X = Not supported
Envelope sizes
Printer model
Size name Literal name Size (mm) Size (inches) Size (points) C746, C748 X746,
X748
7 3/4 3.875x7.5envelope 98.4 x 190.5 3.875 x 7.5 279 x 540
Commercial 9 3.875x8.875envelope 98.4 x 225.4 3.875 x 8.875 279 x 639
PostScript (PS) emulation 15