Lexmark 748dte Printer User Manual


 
= Supported
X = Not supported
Envelope sizes
Printer model
Size name Literal name Size (mm) Size (inches) Size (points) C746, C748 X746,
X748
Commercial 10 4.125x9.5envelope 104.8 x 241.3 4.125 x 9.5 297 x 684
International B5 176x250envelope 176 x 250 6.93 x 9.84 499 x 708
International C5 162x229envelope 162 x 229 6.38 x 9.01 459 x 649
International DL 110x220envelope 110 x 220 4.33 x 8.66 312 x 624
Other envelope otherenvelope 296.93 x 427.48 11.69 x 16.83 842 x 1212
Literal names supported
= Supported
X = Not Supported
Literal names
Printer model
Literal name Compatible literal name C746, C748 X746, X748
b5envelope 176x250envelope XX
c5envelope 162x229envelope
com10envelope 4.125x9.5envelope
dlenvelope 110x220envelope
monarcenvelope 3.875x7.5envelope
PostScript envelope tray support
If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the
envelopetray operators listed in “Envelopetray operator selections” on page 17, then the following occurs:
The printer sets the PageSize Policy to 0.
The printer checks the active source to see if it matches the requested envelope size. If the sizes match, then the
envelope is fed from the active source.
Note: The active source is the last source selected from the printer control panel or data stream.
If the requested size and the size loaded in the active source do not match, then the sources are searched in the
order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
If the requested media size is not found by the previous search, then the following search order is used:
Envelope feeder
Multipurpose feeder
PostScript (PS) emulation 16