Filter
Top Products
59Loading Print Materials
Using the multipurpose feeder After loading print material in the multipurpose feeder, select the
paper source from your software application, and then select the
paper size and type from both your software application and from
the printer operator panel.
To set the printer operator panel:
1 Make sure the
PAPER SIZE
for the multipurpose feeder
(
MP
Feeder Size
)
is set to the correct size paper, envelope, or other
print material you are loading (refer to the Administrator’s
Guide for detailed information about this setting).
2 Make sure the
PAPER TYPE
for the multipurpose feeder (
MP
Feeder Type
) is set to the correct value for the print material
you are loading (refer to the Administrator’s Guide for detailed
information about this setting).
3 Press
Go
to return to
Ready
.
N
OTE
:
Software settings may override operator panel
settings.