Filter
Top Products
1-4 Service Manual
5016-001
Fusing System Hot roll fuser 170 degree C
(Hot roll 30mm, backup roll 34mm)
Operating
Temperature
• 10 - 35 degrees C (50 - 95 degrees F)
Erase System Light discharge (LED lamp)
Image Transfer
System
• Intermediate transfer (primary)
• Transfer roller (secondary)
PC Drum Photoconductor: OPC (organic photoconductor)
Cleaning System Blade
Printer Memory • 32MB SDRAM
Note: Some models may ship with more memory.
When a duplex unit is installed, 64MB is the
recommended minimum printer memory.
• Maximum usable memory: 384MB
Interface • Base printer: parallel standard Centronics protocol
compliant with bidirectional IEEE 1284B.
• Network printer: Ethernet standard connection.
Internal
Solutions Ports
• Three ports for network adapters, tri-port adapters,
parallel port adapters or hard disk.
• Three memory slots.
Printer Options • Optional paper drawer: drawer unit with two 250 sheet
trays installed underneath the printer.
• Duplex unit: provides two sided color or monochrome
printing.
• Hard disk: 2.5 inch hard disk to store fonts, forms, job
statistics and spooled jobs (4gt limit).
Internal Print
Servers
Internal print servers available to support the following
topologies:
• Ethernet 10BaseT and 10Base2.
• Ethernet 10/100Base TX.
• Token-Ring (connects the printer to a Token-Ring
network via DB9 or FJ45).
Tri-port Adapter Provides support for the following interfaces:
• Serial RS-232C/RS-422A (which can also be
configured to support a class 1 Fax modem.
• High speed infrared local connections.
• LocalTalk network connection.
Feature Description