Filter
Top Products
Ordering a fuser wiper
Part name Part number
Oil wiper in bag 40x8579
Wax wiper in bag 40X8581
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
• Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 11 or 13) can be seen on
the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
• Pull down the printer rear door. The two-digit fuser type code (such as 11 or 13) can be seen on the rear of the
fuser.
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and
can be individually ordered and replaced if necessary.
• For more information on replacing the parts included in the maintenance kit, see the instruction sheet that
came with each part.
Lexmark Return Program fuser maintenance kit type
Type Part number
MS710 Series Return Program fuser maintenance kit type 11, 110–120V 40X8530
MS710 Series Return Program fuser maintenance kit type 13, 220–240V 40X8531
MS710 Series Return Program fuser maintenance kit type 15, 100V 40X8532
Lexmark regular fuser maintenance kit type
Type Part number
MS710 Series regular fuser maintenance kit type 17, 110–120V 40X8533
MS710 Series regular fuser maintenance kit type 19, 220–240V 40X8534
MS710 Series regular fuser maintenance kit type 21, 100V 40X8535
Lexmark roller kit
Part number
MS710 Series roller kit 40X7706
Maintaining the printer 148