Filter
Top Products
Use To
10 Wi‑Fi indicator
Check the wireless status of your printer.
11 Eco‑Mode
• Change to Sleep mode after the printer is left idle for 10 minutes.
• Reduce the screen brightness.
12 Back
• Return to the previous screen.
• Exit from one menu level to a higher one.
Changing the Sleep timeout
The Sleep timeout is the time it takes for the printer to switch to Sleep mode when the printer is left idle. The Sleep
feature optimizes energy efficiency by reducing the printer power consumption. To save the most energy, select the
lowest Sleep timeout.
1 From the printer control panel, navigate to:
> Setup >
OK
> Device Setup >
OK
> Sleep >
OK
2 Press the up or down arrow button to select or use the keypad to enter the value of the Sleep timeout, and then
press
OK
.
Saving paper and energy
To significantly cut paper usage and reduce paper waste, activate duplex printing:
1 From the printer control panel, navigate to:
> Setup >
OK
> Print Mode Setup >
OK
> 2‑Sided Copy, Standalone >
OK
2 Press the up or down arrow button to scroll to On, and then press
OK
.
To optimize energy efficiency, reduce the Sleep timeout and Screen Brightness:
1 From the printer control panel, navigate to:
> Setup >
OK
> Device Setup >
OK
> Sleep >
OK
2 Press the up or down arrow button to select or use the keypad to enter the Sleep timeout value, and then press
OK
.
3 From the printer control panel, navigate to:
> Setup >
OK
> Device Setup >
OK
> Screen Brightness >
OK
4 Press the up or down arrow button to scroll to Dim, and then press
OK
.
Note: If you select 2‑Sided Copy, Standalone, then the printer prints on both sides of the paper (duplex) for
copy and fax jobs, and for printing in Windows and Macintosh, depending on your printer model.
Using the printer control panel buttons and menus 17