Filter
Top Products
276
Understanding the printer messages
39 Complex Page The page may not print correctly
because the print information on the
page is too complex.
• Press Go to clear the message
and continue printing the job. The
job may not print correctly.
• Press Menu to open the Job
Menu and cancel the current job.
• To avoid this error in the future:
– Reduce the complexity of the
page by reducing the amount
of text or graphics on the page
and deleting unnecessary
downloaded fonts or macros.
– Set Page Protect to On in the
Setup Menu.
– Install additional printer
memory.
See also: Setup Menu
4<x> Unsupported
Firmware Card
The printer detects an unsupported
version of firmware on the installed
firmware card during the power-on
cycle.
• Turn the printer off, and then
press and hold Go while turning
it on. The printer reads the code
on the system card and
bypasses the code on the
firmware card.
• Remove the firmware card.
See also: Setup Guide
51 Defective Flash The printer detects defective flash
memory.
Press Go to clear the message and
continue printing. You must install
different flash memory before you
can download any resources to
flash.
52 Flash Full There is not enough free space in the
flash memory to store the data you are
trying to download.
• Press Go to clear the message
and continue printing.
Downloaded fonts and macros
not previously stored in flash
memory are deleted.
• Delete fonts, macros, and other
data stored on the flash memory.
• Install flash memory with more
storage capacity.
53 Unformatted Flash The printer detects unformatted flash
memory.
• Press Go to clear the message
and continue printing. You must
format the flash memory before
you can store any resources on
it.
• If the error message remains, the
flash memory may be defective
and require replacing.
Message What this message means What you can do